Tags
army, installation, base, bases, air force, armory, fort, Military, camp, boundaries, arsenal, National Guard, boundary, intelligence
The data layer was developed by the Arkansas Army National Guard (AR ARNG) for use by its staff, National Guard Bureau, and contractors.
Boundary locations throughout the state of Arkansas that include, but are not limited to, Army Installations and Airforce Installations.
There are no credits for this item.
This spatial data is intended for reference and general assessment at the state level. ARARNG, and all related personnel, expressed or implied, make no warranty regarding accuracy, completeness or convenience of any information disclosed in this data set. Under no circumstances, including, but not limited to, negligence, shall ARARNG be liable for any direct, indirect, incidental, special, or consequential damages that result from the use, or inability to use, these reference materials.
Extent
| West | -94.400073 | East | -89.916835 |
| North | 36.023374 | South | 34.237363 |
See access and use constraints information.
This spatial data is intended for reference and general assessment at the state level. ARARNG, and all related personnel, expressed or implied, make no warranty regarding accuracy, completeness or convenience of any information disclosed in this data set. Under no circumstances, including, but not limited to, negligence, shall ARARNG be liable for any direct, indirect, incidental, special, or consequential damages that result from the use, or inability to use, these reference materials.
Land and water currently owned or used by the military installation or facility
SDSFIE Release 2.400
Internal feature number.
Esri
Sequential unique whole numbers that are automatically generated.
FOREIGN KEY - Links the record to CMGENAGC through primary key AGENCY_ID.
SDSFIE Release 2.400
The unit of measure for length
SDSFIE Release 2.400
The current status of the installation boundary.
SDSFIE Release 2.400
Coordinates defining the features.
Foreign Key. Used to link the record to the applicable feature level metadata record(s).
SDSFIE Release 2.400
The reason the particular installation boundary was established representing current deed, historical, usage, or special security.
SDSFIE Release 2.400
The distance around the boundary of the area, zone, or subject item in linear units.
SDSFIE Release 2.400
The date the boundary was modified or initially established. Format for date is YYYYMMDD (i.e., September 15, 1994 = 19940915).
SDSFIE Release 2.400
A description of the feature.
SDSFIE Release 2.400
Internal feature number.
ESRI
Sequential unique whole numbers that are automatically generated.
Foreign Key. Used to link the record to the Facility Record.
SDSFIE Release 2.400
The z component of individual coordinate point.
SDSFIE Release 2.400
Name of the installation.
SDSFIE Release 2.400
The unit of measure for area.
SDSFIE Release 2.400
River mile marker.
SDSFIE Release 2.400
Feature geometry.
ESRI
Coordinates defining the features.
The parent organization of the installation.
SDSFIE Release 2.400
The abbreviated name of the Major Command.
SDSFIE Release 2.400
A Boolen indicating whether the presence of CTT ranges on the installation. ( Y = YES and N = NO).
SDSFIE Release 2.400
A Boolen indicating whether or not this the presence of A/I ranges on the installation. (Y = YES and N = NO).
SDSFIE Release 2.400
The principal purpose of functional category of the military installation.
SDSFIE Release 2.400
The service component that owns the installation.
SDSFIE Release 2.400
The status of the installation use area.
SDSFIE Release 2.400
The sum of the area of the complexes on an installation.
SDSFIE Release 2.400
FOREIGN KEY - Links the record to LSMGIGEO through primary key GNIS_ID.
SDSFIE Release 2.400
An alternate name that the installation is typically referred to as.
SDSFIE Release 2.400
Indicates if the installation is selected for closure (yes/no).
SDSFIE Release 2.400
FOREIGN KEY - Links the record to CMGENPOC through primary key POC_ID.
SDSFIE Release 2.400
Indicates the Government Branch or Independent.
SDSFIE Release 2.400
The replacement cost of a facility, to the five-foot line, calculated in today's dollars with today's standards for design and construction. It includes supervision, inspection and overhead (SIOH) costs as well as design costs.PRV is calculated by DoD component using the OSD-developed formula as follows: PRV=(Facility Quantity X Construction Cost Factor X Area Cost Factor) X 1.2, where Facility Quantity is the Primary Unit of Measure quantity; Area Cost Factor is the adjustment applied for geographical location; and 1.2 is a 20% adjustment for SIOH and design costs.
SDSFIE Release 2.400
The date the PRV was last calculated. Format for date is YYYYMMDD (i.e., September 15, 1994 = 19940915).
SDSFIE Release 2.400
Code for a US Military Grid System quadrangle. The quadrangle is usually 6 degrees long by 8 degrees lat., but above 72 degrees N. Lat., it is 6 degrees long by 12 degrees lat. Only P and P-X are used for the Northern Hemisphere (C_H, J_N, P_X).
SDSFIE Release 2.400
The unit of measure for the complex area.
SDSFIE Release 2.400
The sub-organization having control of or interest in the installation.
SDSFIE Release 2.400
The abbreviated name of the Major Subordinate Command.
SDSFIE Release 2.400
Date the installation was added to the National Priorities List. Format for date is YYYYMMDD (i.e., September 15, 1994 = 19940915).
SDSFIE Release 2.400
The date the installation was acquired; if it was acquired. Format for date is YYYYMMDD (i.e., September 15, 1994 = 19940915).
SDSFIE Release 2.400
EPA Region Number. Number designating the EPA region within which the installation resides.
SDSFIE Release 2.400
EPA designation for the installation (EPA site).
SDSFIE Release 2.400
FOREIGN KEY - Links the record to CDDODCMD through primary key DODCMD_ID.
SDSFIE Release 2.400
Path and name of the .dgn file containing a drawing or survey of the property, boundaries, etc.
SDSFIE Release 2.400
Coordinate basis to which all coordinates are referenced at the installation.
SDSFIE Release 2.400
The sum of the operational areas.
SDSFIE Release 2.400
The phone number of the security office for the military installation.
SDSFIE Release 2.400
The code indicating the property use of the installation
SDSFIE Release 2.400
The adjustment factor to be applied to east coordinates to equate to the coordinate system basis.
SDSFIE Release 2.400
Commonly used name for the installation area.
SDSFIE Release 2.400
Date the installation was removed form the National Priorities List. Format for date is YYYYMMDD (i.e., September 15, 1994 = 19940915).
SDSFIE Release 2.400
The locally assigned designator for the division by name.
SDSFIE Release 2.400
Managing agency of the military installation area.
SDSFIE Release 2.400
Foreign Key. Used to link the record to the subject item's address.
SDSFIE Release 2.400
The y component of individual coordinate point.
SDSFIE Release 2.400
Foreign Key. Used to link the record to the appropriate point coordinate record(s).
SDSFIE Release 2.400
A numeric identification of a raster element in an image or grid that represents the feature.
SDSFIE Release 2.400
Foreign Key. A unique, user defined identifier for each record or instance of an entity.
SDSFIE Release 2.400
The adjustment factor to be applied to north coordinates to equate to the coordinate system basis.
SDSFIE Release 2.400
The unit of measure for area.
SDSFIE Release 2.400
Foreign Key. Used to link the record to the appropriate map.
SDSFIE Release 2.400
The type of military installation.
SDSFIE Release 2.400
An operator defined work area. This attribute can be used by the operator for user defined system processes. It does not effect the subject item's data integrity and should not be used to store the subject item's data.
SDSFIE Release 2.400
Primary Key. A unique, user defined identifier for each record or instance of an entity.
SDSFIE Release 2.400
Internal feature number.
ESRI
Sequential unique whole numbers that are automatically generated.
An actual total cost for completing the activity. Round off to nearest thousand dollars.
SDSFIE Release 2.400
The size of the area, zone, or polygon in square units.
SDSFIE Release 2.400
Foreign Key. Used to link the record to associated multimedia records that reference data such as imagery, video, audio, scanned documents, drawings, and other digital media.
SDSFIE Release 2.400
Feature geometry.
ESRI
Coordinates defining the features.
A description for the installation.
SDSFIE Release 2.400
The x component of individual coordinate point.
SDSFIE Release 2.400